Loading... Please wait...


Our Newsletter

Access Control System Stand-alone with Wiegand Card Reader and Pin Output

  • Access Control System with card and pin in stand alone or Wiegand output modes
  • Back base plate with wiring instructions and light tamper
$131.95 (inc GST) $119.95 (exc GST)
Calculated at checkout

Product Description

The ACS001 Access Control System is an all in one access control solution with a host of operations modes including:

• Wiegand pin code keypad and Wiegand card reader suitable for all access control systems.

• Stand alone access control unit with; request to exit, door monitoring with DOTL alarm, pin code and card entry, dual pole lock relay, beeper output, 2000 users, adjustable open times and much more.

The unit is rated to IP68 (completely dust proof and able to be fully immersed for extended lengths of time), all of the electronics are potted for further water proofing, the case is made of an electroplated zinc alloy and the buttons are backlit. The ACS001 can be mounted anywhere indoors, outdoors, in weather and in completely wet areas.

The ACS001 can be programmed through the keypad, the beeper and LED lights make the programming extremely easy. Great on a front door or gate the unit has a doorbell output for users that don't have access. The request to exit button can be used to shunt door alarms and allow visitor access through a REX button on the secure side of the building.

This unit has all the access features and processing power you need for a single door installation, all you need is a power supply and electric lock. We also stock Wiegand 26 bit cards suitable for the card reader built into this unit.


•IP68 Case

• Anti-Vandal Zinc Alloy electroplated case

• Complete standalone unit with 2000 users

• Supports users with; card, pin, and card and pin

• Backlit Keys

• Wiegand 26 output for connection to access control systems

• Adjustable door output time, alarm time, door open time

• Fast operating time when fully loaded <20ms with 2000 users programmed

• Short circuit protection on lock output

• Anti tamper built into unit via light sensor (LDR resistor)

• Built in buzzer

• Red, yellow and green LED light for status updates

• Fail safe or secure lock options (power to open and power to lock)



• Operating voltage: 12V DC

• Current:  idle <30mA, active 60mA

• User capacity: 2000

• Card reading distance: 3 to 6cm

• Lock output load: 3A max

• Alarm output load: 20A max

• Operating temperatures: -45 to 60°C

• Operating humidity: 100%

• Door relay time: 0 to 99 seconds

• Alarm output times: 0 to 3 minutes

• Wiegand interface for pin codes and cards: Wiegand 26 bit

• Inputs: request to exit, door monitoring, 12V DC

• Outputs: doorbell, Wiegand, lock control (bi-pole)

• Dimensions: W 56mm, H 119mm, D 20mm - taken from the base of the unit at its largest point


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers Who Viewed This Product Also Viewed

Add to Wish List

Click the button below to add the Access Control System Stand-alone with Wiegand Card Reader and Pin Output to your wish list.

Related Products

You Recently Viewed...